What Is the Smallest Fine Art Paper You Can Use in Pro 100

Larn all virtually the Catechism PRO-100 with our Review Start Await Introduction and Getting Started

Introduction

The Canon PRO-100 was announced in September of 2012 and is the successor to the Canon Pro9000 MkII. It is a xiii" wide, eight color, dye based photo inkjet printer. Designed for assuming colour reproduction on any quality inkjet newspaper, the PRO-100 is a robust photo printer that should exist considered by the photo enthusiast, graphic designer, business user, and anyone else needing 13" adequacy.

Only the Facts

13" broad photo quality inkjet printer

Print 4" ten half dozen" up to xiii" x 26" banners

Eight Dye Based Inks - Cyan, Yellowish, Magenta, Blackness, Photograph Cyan, Photograph Magenta, Gray, Low-cal Gray

Estimated Retail Cost $499

Ink Toll - About $16.99 per tank retail

Standard Ink Tanks - Holding about 13mL of ink each

Opening the Box

The Catechism PRO-100 box arrived in good condition after its long journeying. The printer came well packed with all of the accessory pieces stored in divide bags. The printer was in a heavy duty plastic bag with handles, which made getting it out of the box a cakewalk. Afterwards plugging in the printer, the quick start guide got united states started in a few unproblematic steps.

The Canon PRO-100 aircraft box includes:

Canon PRO-100 printer
CD/DVD printing tray
Inks
Print Head
Manual
Power Cord
Setup CD
USB Cable

Catechism Pixma Pro-100 Inks

The printer comes with a full ready of CLI-42 ink cartridges. A modest amount of ink will be used in the printer setup, but you volition still take plenty left to make prints and go familiar with the machine.

Anatomy of a Canon ink tank

A - Bottom of ink tank and ink outlet. The orange cap will be removed before ink is installed

B - Ink reservoir. Canon inks accept two chambers. The rear surface area is open, allowing you to visually audit the ink level. The frontward expanse is packed with absorptive material and holds a portion of the ink book above the outlet to the printer caput.

C - Onboard chip. The onboard chip stores and reports ink level. It does non really know how much ink is physically in the tank. Rather, information technology starts at 100%, then records nozzle firing information sent from the printer and subtracts volume. The system is very accurate, and you will indeed see a dry tank when information technology comes time to do a replacement.

Impress Head

The PRO-100 print head / ink cartridge assembly comes in a carve up sealed pocketbook. A large orange plastic encompass must be removed to reveal the head (run across at correct). Installing the caput, then inks into their carriage is simple and takes about a minute.

Being able to audit an inkjet print head up close is very interesting. It gives you a expert idea of the amazing applied science involved in inkjet printing and the truly pocket-sized scale of a print caput.

Once installed y'all will run into a light on the front of the ink tank illuminate and glow steady crimson. The same light blinks slowly when you're low on ink and quickly in one case the tank has been depleted.

Canon PRO-100 Ink Tanks Included

Black CLI-42
Cyan CLI-42
Magenta CLI-42
Yellow CLI-42
Photo Cyan CLI-42
Photo Magenta CLI-42
Gray CLI-42
Light Grey CLI-42

Getting Set to Impress

In one case all of the inks were installed, the printer charged up and was ready to begin printing in less than five minutes.

The assembled printer is 27.2" wide, xv.2" deep, viii.5" loftier, and weighs 43 pounds.

You'll want at least 10" of clearance from the back of the printer to the wall for proper operation and employ of the specialty paper tray.

When fully extended, the front paper tray extends 12.5" from the front end of the printer.

Forepart Command Panel

The forepart control panel of the PRO-10 consists of iii controls:

Power button with lite
Resume / Cancel push with warning light. Errors will be identified by dissimilar sequences of blinking. Consult your online manual for help with decoding the sequence should you take a problem.
Wireless connectivity push with indicator light

Connectivity

The PRO-100 can connect to your computer via USB 2.0, wireless network, or ethernet.

The PRO-10 has two media feed paths and a CD/DVD printing tray

Rear tray - for the majority of media you'll employ
Manual feed - single sail tray for heavy and specialty media

Canon notes that the recommended paper capacity for the rear tray is 20 pages for 4" x six" and 5" x 7" photo media, 10 pages for letter and 8" x 10" photo media and a single folio for larger sizes. A single folio is as well recommended for Fine Art papers.

Red River's experience thus far is that the rear tray can hold up to 50 sheets, depending on the thickness of your paper. Photo papers like luster, satin, and glossy at ten.4mil are expertly handled by the PRO-100 with no misfeeds. If you're using matte paper or thick media, fewer sheets should exist fed in at i time. Art stock, canvas, and specialty paper should be fed into the manual unmarried sheet path. For some commuter media settings, the printer will only permit the single sheet path to be used.

CD Printing Capability

To a higher place you can see the CD holder that comes with the printer. The holder is placed into a front slot on the left side of the machine. Please note that y'all'll need specialty CD or DVD media coated for inkjet printing.

Catechism's My Image Garden software is provided to set upwardly and print discs.

Print Speeds and Results

Print Quality

The Canon PRO-100 offers what we tin just draw as continuous tone photo printing. That is to say when you're printing a typical photo, the dots of ink that brand upward the photo are not visible at normal viewing distance or even adequately close inspection. This is especially true when printing on satin, luster, and glossy media. Solid blocks of color are uniform and shine looking. Only in some mid-tone areas will yous occasionally run across a few dots. Again, one would need to be unnaturally close to the print to see them! As far as inkjet printing goes, the PRO-100 produces outstanding photo quality.p>

Print Speed

An 8" x 10" file at 240ppi (shown higher up) was printed and timed using the settings listed below:

Luster Paper Highest Quality (Level 1) = ii minutes 21 seconds
Luster Paper High Quality (Level 2) = 1 minute 36 seconds
Luster Newspaper Standard Quality (Level iii) = 50 seconds

Matte Paper High Quality = ii minutes 19 seconds
Matte Newspaper Standard Quality = 1 minute 34 seconds

Quality Settings

We printed the target file on UltraPro Satin and 47lb. Premium Matte using the Photo Newspaper Pro Luster and Matte Photo Newspaper media settings, respectively. The prints were allowed to dry 8 hours, and then evaluated under balanced 4700k Solux lights.

Our initial evaluation revealed lilliputian obvious difference between the prints. Saturation and colour residuum were similar. Even solid color patches and transitions were hard to distinguish upon coincidental viewing.

Closer inspection of the Standard quality print revealed a slight reddish cast, especially in grayscale transition areas. The cast disappeared and grays shifted back to neutral at the higher settings.

The biggest difference between Standard and higher quality settings was border definition and clarity. You lot can come across the difference in these macro shots below.

The difference betwixt Standard quality level 3 and the higher quality prints is apparent. Keep in heed that these are macro image and the difference is not striking at viewing altitude. Still, the smoother dot pattern and cleaner edges of quality level 2 and ane will result is sharper looking prints.

Our conclusion is that Level 2 Loftier print quality is the best setting for most photograph projects. The Level ane setting does not result in appreciably ameliorate print quality and takes 38% longer to complete.

Blackness & White

For the first time, Canon has included grayness and low-cal gray inks in a PRO level dye based printer. In combination with black, these 2 new tanks profoundly help the B&W output of the PRO-100. Another first is detailed printer driver control of grayscale output. Our tests consisted of press the 8x10 test print (shown in a higher place) using the driver B&Due west feature. Photoshop was gear up to Printer Manages Color and no adjustments were made to the target file. We printed the target using the default, Cool Tone, and Warm Tone settings. After drying for eight hours the prints were evaluated under balanced Solux calorie-free.

Neutral - neutral grays with trivial or no color cast
Absurd Tone - a very slight shift to bluish and a cooler await
Warm Tone - a lite just noticeable warm shift with a slight xanthous tone

Tone can also be controlled via Ten and Y variables, slider bars, or by placing your mouse inside the Tone box.

Brightness settings include normal, lite and night. Intensity and contrast are sliders allowing for finer adjustments.

All of these adjustments volition be "previewed" using a standardized sample prototype. The drop down menu beneath the pencil photograph at correct allows you to choose different preview samples. What actually happens on your printed prototype may be different. We propose being judicious with changes and make pocket-sized test prints when getting started.

Overall we were pleased with the results. You will benefit from well prepared files, which ways proper exposure likewise every bit some additional mid-tone contrast. Both are helpful in adding the proper amount of intensity and life into a black & white print.

Canon Pro-100 Printer Driver Bout

Quick Setup Tab

The Canon PRO-100 printer drivers are basically unchanged from previous PRO printer models. We're starting on the Quick Setup tab, which contains well-nigh of the controls y'all'll need for printing.

From this menu you can choose the media type (paper type), paper size, print quality, and other important features.

Main Tab

Nosotros recommend using this screen as much as possible as it gives you lot access to the custom impress quality and manual color controls.

Media Blazon

When setting up a print job, you must tell the printer the type of inkjet paper (media) that you are using. Remember of the media type equally role color profile and part ink throttle. Different inkjet papers need different amounts of ink to perform properly - and this is where the media setting becomes important.

If you are using ICC color profiles, the media blazon is critical. You lot accept to set the media according to your contour'south instructions in society to get the best results.

Note! You volition not see alternative newspaper brands, such as Red River Newspaper, in this listing. Only manufacturer inkjet media are in this driblet down.

Fine art Margins - If you cull a fine fine art or not-Canon specialty media type, the printer driver forces a 30mm (1.18") margin to the top and bottom of your print. The left and correct margins are set at 3.4mm (0.13"). The media settings also limit the available paper size you lot can utilize to:

Letter
A4
A3
A3+ 13x19

The characteristic is almost likely an attempt to minimize possible head strikes at the beginning and ending of a print when using "fine art" papers. As a issue, Red River Paper and other paper companies have chosen to make their fine art printer profiles with the Matte Photograph Paper setting, which avoids the size and margin constraint.

Quality Options

Print quality can be controlled from the Quick Setup and Main tabs.

Quality Choices

On either the Quick Setup or Main tab, quality settings of Standard and High are available when using photo quality media.

To access the custom quality menu, become to the Main tab, click on the Custom radio button, and so click Set. A slider controls the print quality setting. Level 2 corresponds to High and Level 3 to Standard quality. Yous will also detect a third quality choice, the Level 1 setting. Canon has non given this setting a named label. Nosotros will call information technology "Highest" for the purposes of this review.

Only glossy, semigloss, and luster media settings have Highest quality as an pick. Lower quality settings, such as Fast (Level iv), are bachelor when patently paper or envelope media are selected. You would choose this setting for text and light graphic press.

Color / Intensity

The PRO-100 driver color controls take an Auto and Transmission mode. In Machine style, the printer is completely in command of color management. You'll choose this setting if you are not using a printer color profile, and if you accept found the printer's default setting to offer adequate output quality.

If yous need to make slight adjustments to the printer's color output, you tin click on the Transmission radio button and then the Set button for the Transmission Color Adjustment menu.

On the Color Aligning tab you'll discover a number of sliders. These are "crude" controls for color saturation, brightness, intensity, and contrast. We say rough considering there is no color managed preview of your image with the changes. The workflow pattern would normally be print, adjust, print, and adjust until you lot got the desired results.

One reply to the trouble is to e'er use a printer colour profile for the PRO-100 and your paper. Profiles take the guesswork out of correction and faithfully reproduce your file to the best of your paper's ability.

For those non swayed by the printer contour statement, Canon has a feature chosen Design Print. Accessible from the printer properties (Windows) or the Print Studio Pro plug-in, Pattern Print will setup and impress a repeating series of your image on a single sail of paper. The pattern represents and denotes various changes to color or effulgence/contrast settings. Upon consulting the choices, you can dial in the recommended changes into the printer'southward color adjustment controls. Make certain you let the test impress dry at least an hour, preferably longer, before making whatsoever decisions.

Below is a screen shot from Print Studio Pro showing the blueprint layout and recommended Cyan, Magenta, and Yellow settings to accomplish the look of each variant.

If yous are using a printer color profile (ICC contour), then you will select the Matching tab. Under the heading Color Correction you'll find:

Driver Matching - this is the default setting for printer color management

None - this setting completely turns off the printer'due south color controls. Use this setting when yous take a printer color profile and are using it to print via Photoshop, Photoshop Elements, Lightroom, Qimage, and the similar.

ICM - Rarely used, ICM allows you to impress using a printer color contour from software that is non "ICC aware". This applies to basic photograph software and layout tools where the developers did not know of or consider color management important.

Folio Setup

Controls for paper size, impress orientation, and layout options are on the Page Setup tab.

Borderless Options

Of particular interest are the Borderless print controls. When Borderless is selected, you will notice the Corporeality of Extension slider appear. When printing without borders, the PRO-100 volition automatically stretch out the edges of a file to insure ink covers the edges of the newspaper. You can increase or subtract this office. Move the slider to the left for more extension. If you lot have a photograph with important details at the edges reduce the amount of extension to avoid those areas being cut off.

Borderless is in pick with the post-obit media settings:

Photo Paper Pro Platinum
Photograph Paper Plus Glossy 2
Photo Paper Pro Luster
Photo Newspaper Plus Semi-gloss
Matte Photo Newspaper

Borderless Sizes Choices

Above you lot'll see all of the possible Canon PRO-100 borderless size options. These are set past the manufactory and cannot be modified.

Read our 11x14 Borderless Hack for the PRO-100.

Custom Paper Sizes

Like other Canon printers, the PRO-100 allows you to define custom paper sizes. The limits:

Paper Width: 12.95" - After some experimentation, we found that a custom size set to xiii" causes a print error. Using 12.95" fixed that issue. Yous will detect 16.54 on the width scale. This seems to be a software coding error.

Paper Height: 26.61" - We establish the effective maximum print pinnacle is 26".

Maintenance Tab

The Nozzle Bank check, Caput Cleaning, and Impress Head Alignment are all disquisitional tools to accept if you experience a drop in print quality. Y'all can call up your printer status dialog from this screen.

Custom Settings

You will notice a very important command in the custom settings menu, Preclude Newspaper Abrasion. Always turn it on when you apply heavy or specialty media. We recommend using the feature with papers over 12mil thickness.

Ink Drying Wait Fourth dimension controls the break betwixt print caput passes. Considering dye inks dry out quickly the setting will probable not need to be changed.

If you use custom sizes and encounter a driver mistake relating to paper size and setting compatibility, try turning off the Detect Paper Width.

Included Software

Descriptions are taken from the Canon online manual.

My Image Garden

My Image Garden is an awarding that allows you to utilize photos taken with digital cameras and other images saved on your figurer, in many ways for various purposes. You tin can organize a vast number of images easily, or create collages, cards and other items from your favorite photos and print them. Moreover, you lot can perform various scans with one click.

Print Studio Pro

Print Studio Pro is a plug-in that makes professional photo press easier and more convenient.

In add-on to printing bordered photos and borderless photos, you can perform diverse printing tasks such as index printing, grayscale printing and printing using ICC profiles. Yous tin can also conform the margins or add text.

Quick Menu

Quick Bill of fare is software that allows you to easily start the applications and manuals supplied with the machine, or speedily admission online product information. In addition, with simultaneously installed Epitome Display, you can enjoy patterns of collages and other items created automatically past the item recommendation office of My Image Garden too as slide shows of images saved on a computer.

Easy-WebPrint EX

Piece of cake-WebPrint EX is software that allows y'all to hands print web pages displayed in Net Explorer.

You lot can print a spider web page by automatically reducing its size to fit the paper width to prevent the edges from being cropped or by selecting pages in preview.

My Printer

My Printer is an application that allows yous to brandish the setting screen of the printer commuter or look up solutions to operational problems.

Blood-red River Paper Compatibility

Our line of Premium Inkjet Papers includes over 30 that Piece of work Well in the Canon PRO-100. You tin Come across the Best Compatible Photograph Paper for the PRO-100 and Order a Sample Kit to Test.

Print Testing

Nosotros made a number of prints on all compatible Red River papers from 4x6 up to 13x19. In near cases we used Printer Colour profiles for the PRO-100. Using profiles is always a expert idea, and in the case of this new printer they actually help increment the saturation and color accurateness.

Glossy Papers

Polish glossy papers like Carmine River UltraPro Gloss 2.0 have reward of the PRO-100's bold color gamut and tack sharp print detail.

Satin / Luster Papers

The calorie-free texture of satin and luster papers are another "must endeavor" for the PRO-100 possessor. The satin surface minimizes fingerprints and better withstands handling. Crimson River'south ever-popular UltraPro Satin and true professional class Arctic Polar Luster are sure to please when paired with the PRO-100.

Photograph Metallic Paper

Polar Gloss Metallic 255 (formerly 66lb. Polar Pearl Metal) allows you to capture the look of Kodak Endura Metallic™ on your home inkjet printer. Images virtually bound off the page and colors are vibrant and most luminous.

Photo Matte

Matte papers are smooth and have no reflection. They are perfect for images and work where fine particular is important. A flat surface means more lite gets straight back to your optics. This means y'all see more than particular and are non distracted by glare. Prints on 60lb. Premium Matte PLUS on the PRO-100 show good detail, well balanced color and adept saturation. Y'all volition greatly benefit from use of printer color profiles when press on matte surfaces.

Fine Photographic, Art, and Canvas media.

The new, easier to apply single sheet tray makes using thick art and canvass media a joy. Make certain to set the "Preclude Paper Abrasion" characteristic in the printer'southward utility when using these inkjet papers. Prints on Ruby-red River Palo Duro Baryta Fiber 300 and Blanco Matte Canvas looked swell and assistance highlight the versatility of the PRO-100.

Starting time Impressions

After spending v days with this printer and printing almost 100 images, we find the Canon PRO-100 an excellent replacement for the Pro9000 MkII. The printer's speed and color quality are on par if not slightly amend than the older motorcar. The addition of a specialty media path for thick papers is bear witness that Canon acknowledges the advanced printing requirements of their photo enthusiast customers.

Positives

Photo quality from the PRO-100 is amazing and is for all intents continuous tone. Dots get visible only on magnified inspection of a impress.
Excellent color gamut made even amend with printer profile use.
Good black & white capability with the addition of gray and light gray inks. Specific B&Due west software controls make the chore of grayscale press easier and more predictable.
Rapid print speed.
Robust newspaper handling from both the regular paper tray and the unmarried sheet specialty path.
Compatible with almost any quality inkjet paper.
Better fade resistance from ChromaLife 100+ inks.

The Ferrari of Inkjet Greeting Card Printers

If you're serious about press photo note cards, we have to say that the PRO-100 is an fantabulous printer for the task. Like nearly Catechism printers, the PRO-100 will feed bill of fare stock consistently through the standard paper tray. Beingness able to put a stack of Pecos River Gloss Notation Cards into the tray, fix the job and walk away is huge for carte du jour printers. Add in the speed, photograph quality, and robust build and you take a professional quality desktop carte du jour printing organisation.

Issues

There are a couple of items that we hoped would exist addressed with this new thirteen" broad dye ink printer. First, we missed 11x14 as an available borderless size. Read our 11x14 borderless hack for the PRO-100

Take Questions? Want to Know More?

Please Contact us via the Support Center with your questions almost the PRO-100, or anything inkjet related. We're happy to share our knowledge from 15 years in inkjet printing with you!

All-time Inkjet Papers for the Canon PRO-100 Printer

Find the Near Popular Uniform Papers for the Canon PRO-100.

Get a Sample Kit for the PRO-100.

thomasonyournized57.blogspot.com

Source: https://www.redrivercatalog.com/infocenter/canon-pro-100-review-introduction-first-look-getting-started.html